Your input device is not recognized as a valid recording device in Adobe Audition 3.0.

If you are using more than one input device and at least one of the devices is not selected as the default recording device in Windows Vista and the input device is listed in the third position or below in the Audition 3.0 Audio Hardware Setup panel, then Audition might not recognize that device as valid and you cannot record audio from the device.

Adobe Audition Not Recording Microsoft

Basically, I have a Blue Yeti USB Mic, not the snowball one, the update of that. I have been using this mic with adobe audition for a while now to record vocals over instrumentals and have had no issues with it for a long time as I found a really good pre-set which made everything sound very clear and professional. In short, a microphone, a computer and Adobe Audition is needed. Audition must be set in the 'Multitrack' function and a name and save location needs to be applied. Be sure that the 'R' is highlighted and place your microphone is placed accordingly. Click on the right circle at the bottom of the screen and the recording is ready to go.

The Audition 3.0 Windows Sound driver can not detect the presence of the input device in this configuration in the Windows Vista operating system.

Use the Audition 3.0 Windows Sound driver but move the input device to position 1 or position 2 in the list of devices.

Select the defivce as the default recording device in the Windows Vista Sound control panel.

Using the native ASIO driver for the device allows Audition 3.0 to effectively use and interact with the device. When a native ASIO device driver is not available, the devcie conflict can be avioded by moving the input device up into the primary or secondary positions in the Audition 3.0 Audio Hardware Setup panel or by setting the device as the default recording device in the Windows Vista Sound control panel.

This tutorial will show you how to record and edit audio in Adobe Audition for podcast projects.

Before you can record in Audition, you will first need to select the input source for the track that you would like to use. In this case, when using the Podcast template, you can use the Host track as your main recording track.

Click the double arrows button above the track name panels to access the input/output selections.

To set the input for the track, first look at the track name panel. In the middle of the track name panel, right under the volume controls for the track, you will see the input selection, indicated by an arrow pointing to the right, with None as the default selection.

This is where the input source will be set. To select your microphone, click the arrow on the right side and then select the microphone that you would like to use. For recording your voice, we suggest that you use the Mono input if available.

Now that you have the input selected, you will need to arm the track to be ready to record. To do this, look at the track name and in the right hand corner of the name you should see three buttons labeled M, S, and R. Click the R button to arm the track to record.

Now you are ready to record. To begin, simply click the red Record button located below the tracks.

As you record, you will see your audio come into the track in red.

When finished, simply click the stop button below the tracks.

Download Adobe Audition For Free

You can start and stop periodically, and then edit out the breaks, to get a smoother recording.

If you need to edit your recording, you can use the Blade tool to cut any part of your recording up to make changes. In this example, let’s assume you needed to delete a section of audio that you are not happy with.

First, you will need to select the blade tool. This icon looks like a razor blade and is located at the top of the interface.

Once selected, you can simply click on the track you would like to edit to at the time that you’d like to cut the track at. In this case, two cuts will be made so that you can delete the middle section out of the project.

Adobe Audition Not Recording Mic

Once you’ve made your cuts, before you can delete the section in the middle, you will need to switch from using the blade tool to the Move tool. This tool is located directly to the left of the Blade tool at the top menu.

Now you can select the section that you’d like to get rid of, and press the Delete key on your keyboard to remove it.

To get rid of the gap in-between the two pieces, simply click and drag the clip and move it to the end of the first clip.